OEMTOOLS 22326 12 mm Metric Deep Socket

Description:

The OEMTOOLS 3/8 Drive Deep Socket - 12 mm is made with a Hard Chrome finish and is easy to clean. The sockets are made with special alloy steel, which is heat treated for extra strength. The sockets have a Posi-Grip No-Slip that provides off corner loading for greater torque and the chamfered ends allow the socket to easily slip over the bolt head.

• Thin wall design gets into tight spaces
• Knurling position is optimized for best finger gripping position
• Cross hatch marking indicates metric size
• Deep marking for easy identification
• 6 Point

Grey Pneumatic (1012MDG) 3/8" Drive x 12mm Magnetic Deep Socket

Description:

3/8" Drive x 12mm Magnetic Deep.

• 3/8" DR X 12MM MAG DP (GRY-1012MDG)

TEKTON 47803 1/2-Inch Drive by 12 mm Deep Impact Socket, Cr-V, 6-Point

Description:

The TEKTON 1/2 in. Drive x 12 mm Deep Impact Socket is engineered for use with impact drivers. It has a 6-point opening that snugly fits the hex shape of fastener heads, allowing it to apply maximum torque without slipping. To prevent round-off under stress, it grips the flat sides of fastener heads rather than the corners. Easy to read even in low light, the large, high-contrast size marking is permanently laser etched into the steel surface. The through-hole in the drive end locks onto the tang of impact wrenches or drivers so it won't fall off or stick on fastener heads. To protect against rust and corrosion, the black phosphate finish absorbs and holds oil, repelling moisture.

• Engineered for use with impact drivers
• High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off
• Extra-deep broach accommodates longer fasteners
• Large, high-contrast size marking is permanently laser etched and easy to read, even in low light
• Made of premium chrome vanadium steel with a protective black phosphate finish

TEKTON 11151 1/4-Inch by 12 mm Deep Socket, Cr-V, 6-Point

Description:

Designed to apply maximum torque, the 6-point opening of the TEKTON 1/4 in. Drive x 12 mm Deep Socket snugly fits the hex shape of fastener heads, so there's no opportunity for slipping. To prevent round off, it grips the flat sides of fasteners rather than the corners. With an extra-deep broach, it reaches over long, threaded shafts to access nuts. Detent notches inside the drive end securely lock socket onto ratchets and extensions, so it won't fall off or stick on fasteners. Made from premium chrome vanadium steel, it's protected from rust and corrosion by a durable mirror chrome plated finish.

• 6-point opening snugly fits hex-shaped fastener heads to apply maximum torque without slipping
• Advanced design grips flat sides of fastener heads, not corners, to prevent round off
• Extra-deep broach reaches over long, threaded shafts to access nuts
• Detent notches in drive end lock onto ratchets and extensions
• Made from premium chrome vanadium steel with a durable mirror chrome plated finish

Sunex 312md 3/8-Inch Drive 12-Mm Deep Impact Socket

Description:

No doubt, the strongest impact socket line around. Sunex Tools impact sockets tackle the toughest jobs with a chrome molybdenum alloy steel grip that won't let go. With solid durability that keeps them driving through job after job, we've got sizes and styles enough to fulfill any need.

• Forged from the finest chrome molybdenum alloy steel-the best choice for strength and durability
• Radius corner design - to extend the life of fasteners
• The design drives the side of the fastener instead of the corner
• 3/8-Inch drive
• 12mm deep impact socket

Sunex 267212 1/2-Inch Drive 12-mm 12-Point Deep Impact Socket

Description:

No doubt, the strongest impact socket line around. Sunex Tools impact sockets tackle the toughest jobs with a chrome molybdenum alloy steel grip that won't let go. With solid durability that keeps them driving through job after job, we've got sizes and styles enough to fulfill any need.

• CR-MO alloy steel for long life
• Lifetime warranty
• 1/2-Inch drive
• 12mm 12-point deep impact socket
• 12 Point sockets offer double the starting points as 6 point sockets

DEWALT 3/8" Deep Impact Socket 6PT 12MM

Description:

These Impact Sockets have DirectTorque technology to help prevent rounding of fasteners and to provide better grip. The socket sizes are clearly shown in large font for easy identification during use.

• Heat treated CR-440 steel for strength and durability
• DirectTorque Technology helps prevent rounding of fasteners
• Laser etched markings for easier identification on black phosphate finishes
• O-ring and retaining pin compatible for added job-site safety
• Oil rubbed Black oxide coating for corrosion resistance

OEMTOOLS 22276 12 mm Metric Deep Socket

Description:

The OEMTOOLS 1/4 Drive Deep Socket - 12 mm is made with a Hard Chrome finish and is easy to clean. The sockets are made with special alloy steel, which is heat treated for extra strength. The sockets have a Posi-Grip No-Slip that provides off corner loading for greater torque and the chamfered ends allow the socket to easily slip over the bolt head.

• Thin wall design gets into tight spaces
• Knurling position is optimized for best finger gripping position
• Cross hatch marking indicates metric size
• Deep marking for easy identification
• 6 Point

TEKTON 1/4-Inch Drive Deep Socket Set, Metric, Cr-V, 6-Point, 5.5 mm - 12 mm, 8-Sockets 12141

Description:

For premium performance, choose the TEKTON 1/4 in. Drive Deep Socket Set (Metric), featuring the eight most common sizes from 5.5 to 12 mm. The 6-point, high-torque design grips the broad, flat sides of fasteners, not just the corners, so you won't strip them. Made from high quality chrome vanadium steel, sockets are hardened and strengthened through a precise heat treating process. A tough chrome plated finish resists rust and corrosion. Each socket is clearly marked with permanently imprinted size for quick identification. Detent notches in drive end lock securely onto ratchets and extensions. This set meets or exceeds ANSI performance standards.

Set Includes:

• (8) 1/4 in. drive deep 6-point sockets (metric): 5.5, 6, 7, 8, 9, 10, 11, 12 mm
• (1) storage rack

• Made from high-strength, heat treated chrome vanadium steel
• Corrosion-resistant chrome plated finish
• 6-point, high-torque design grips flat sides of fastener, not corners, preventing round-off
• Notched drive locks onto ratchet or extension
• Set Includes: 8-pc. 1/4 in. dr. deepwell 6-point sockets (metric): 5.5, 6, 7, 8, 9, 10, 12 mm

DEWALT 1/2" 6 PT Deep Socket 12MM

Description:

These Hand Sockets have DirectTorque technology to help prevent rounding of fasteners and to provide better grip. The chrome finish helps provide protection against chipping and flaking.

• DirectTorque Technology
• Polished chrome vanadium finish
• Knurled control ring
• Hard stamped markings

• Wormwood capsules now
• Los angeles lakers can coolers
• Heater valve 1 2
• Hampton fitness rubber weight
• Pocket rockers toys
• Libra scales of justice