Stratocaster neck rosewood

Mighty Mite Neck for Strat Guitar, Indian Rosewood Fingerboard

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Shaped, inlaid, fretted and finishedfeels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.

Other features include:

  • The frets are nicely finished.
  • The string nut is slotted and shaped from PPS plastic with a flat bottom.
  • Indian Rosewood fretboard with dot inlays and side markers.
  • Screwholes for attaching to the body are not drilled.
  • Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief).
  • Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings.

Specifications:

  • Scale length: 25-1/2" (647.70mm)
  • Width at nut: 1-11/16" (42.86mm)
  • Width at 22nd fret: 2-3/16" (55.56mm)
  • Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
  • Fretboard radius: 9-1/2" (241.30mm)
  • Fret count: 22
  • String post spread: 4-11/16" (119.06mm)
  • Approximate heel length: 3-5/8" (92.07mm)
  • Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

Neck thickness (approximate; not including fret):

  • .860" (21.84mm) at the 1st fret
  • .880" (22.35mm) at the 6th fret
  • .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

Buy stratocaster neck rosewood from Amazon.com
  • Shaped, inlaid, fretted and finished-feels and plays great
  • Hard rock maple finished in clear satin polyurethane
  • Each neck has a single-action truss rod and traditional "skunk stripe" down the back
  • Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
  • Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)



Buy stratocaster neck rosewood from Amazon.com


Fender American Stratocaster Neck

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Crafted at our Ensenada, Mexico manufacturing facility, this genuine Fender Stratocaster neck features a comfortable "C"-shaped profile and 12"-radius pau Ferro fingerboard with 22 jumbo frets. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. This replacement neck is the perfect way to give your Strat authentic Fender feel.

Buy stratocaster neck rosewood from Amazon.com
  • 12"-radius pau Ferro fingerboard
  • "C"-shaped neck profile
  • 22 jumbo Frets; paroled Dot Inlays
  • Pre-slotted synthetic bone nut
  • Satin urethane finish
Buy stratocaster neck rosewood from Amazon.com


Fender American Stratocaster Neck

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style Fender Stratocaster neck features a comfortable "C"-shaped profile and 7.25"-radius pau Ferro fingerboard with 21 vintage-style frets. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots, and a gloss nitrocellulose lacquer finish offers a vintage feel. This replacement neck is the perfect way to give your Strat an authentically '60s feel.

Buy stratocaster neck rosewood from Amazon.com
  • 7.25"-Radius Paul Ferro Fingerboard
  • "C"-shaped neck profile
  • 21 vintage-style Frets; White Dot Inlays
  • Pre-slotted synthetic bone nut
  • Gloss Nitrocellulose lacquer finish
Buy stratocaster neck rosewood from Amazon.com


Mighty Mite Neck for Tele Guitar, Indian Rosewood Fingerboard

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Shaped, inlaid, fretted and finishedfeels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.

Other features include:

  • The frets are nicely finished.
  • The string nut is slotted and shaped from PPS plastic with a flat bottom.
  • Indian Rosewood fretboard with dot inlays and side markers.
  • Screwholes for attaching to the body are not drilled.
  • Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief).
  • Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings.

Specifications:

  • Scale length: 25-1/2" (647.70mm)
  • Width at nut: 1-11/16" (42.86mm)
  • Width at 21st fret: 2-3/16" (55.56mm)
  • Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
  • Fretboard radius: 9-1/2" (241.30mm)
  • Fret count: 21
  • String post spread: 4-11/16" (119.06mm)
  • Approximate heel length: 3-5/8" (92.07mm)
  • Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

Neck thickness (approximate; not including fret):

  • .860" (21.84mm) at the 1st fret
  • .880" (22.35mm) at the 6th fret
  • .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

Buy stratocaster neck rosewood from Amazon.com
  • Shaped, inlaid, fretted and finished-feels and plays great
  • Hard rock maple finished in clear satin polyurethane
  • Each neck has a single-action truss rod and traditional "skunk stripe" down the back
  • Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
  • Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)


Buy stratocaster neck rosewood from Amazon.com


Mighty Mite Vintage Amber Neck for Strat, Indian Rosewood Fingerboard

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Shaped, inlaid, fretted and finishedlooks and plays great! Hard rock maple with a thin, vintage tint finish, and an inlaid "skunk stripe" down the back.

Other features include:

  • Thin polyurethane finish
  • Slotted and shaped PPS plastic string nut, with flat bottom
  • 22 frets
  • Indian Rosewood fingerboard
  • Peghead-adjustable truss rod (for 4mm Allen wrench)
  • Traditional dot inlays
  • Without mounting holes, so you can drill to fit your body
  • Peghead drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushings.

Specifications:

  • Scale length: 25-1/2" (647.70mm)
  • Width at nut: 1-11/16" (42.86mm)
  • Width at 22nd fret: 2-3/16" (55.56mm)
  • Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
  • Fretboard radius: 9-1/2" (241.30mm)
  • Fret count: 22
  • String post spread: 4-11/16" (119.06mm)
  • Approximate heel length: 3-5/8" (92.07mm)
  • Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

Neck thickness (approximate; not including fret):

  • .860" (21.84mm) at the 1st fret
  • .880" (22.35mm) at the 6th fret
  • .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

Buy stratocaster neck rosewood from Amazon.com
  • Shaped, inlaid, fretted and finished-feels and plays great
  • Hard rock maple with a thin, vintage tint finish
  • Each neck has a single-action truss rod and traditional "skunk stripe" down the back
  • Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
  • Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)



Buy stratocaster neck rosewood from Amazon.com


Mighty Mite Neck for Strat Guitar, Maple Fingerboard

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Shaped, inlaid, fretted and finishedfeels and plays great! Hard rock maple finished in clear satin polyurethane, with an inlaid "skunk stripe" down the back.

Other features include:

  • The frets are nicely finished.
  • The string nut is slotted and shaped from PPS plastic with a flat bottom.
  • Maple fretboard with dot inlays and side markers.
  • Screwholes for attaching to the body are not drilled.
  • Has a single-action truss rod with a 4mm adjusting nut at the peghead (we recommend a 4mm Allen Truss Rod Wrench for adjusting neck relief).
  • Peghead is drilled for 6-in-line tuning machines. 10mm-diameter holes fit sealed gear tuners with threaded peghead bushings.

Specifications:

  • Scale length: 25-1/2" (647.70mm)
  • Width at nut: 1-11/16" (42.86mm)
  • Width at 22nd fret: 2-3/16" (55.56mm)
  • Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
  • Fretboard radius: 9-1/2" (241.30mm)
  • Fret count: 22
  • String post spread: 4-11/16" (119.06mm)
  • Approximate heel length: 3-5/8" (92.07mm)
  • Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.

Neck thickness (approximate; not including fret):

  • .860" (21.84mm) at the 1st fret
  • .880" (22.35mm) at the 6th fret
  • .890" (22.61mm) at the 12th fret

Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.

Buy stratocaster neck rosewood from Amazon.com
  • Shaped, inlaid, fretted and finished-feels and plays great
  • Hard rock maple finished in clear satin polyurethane
  • Each neck has a single-action truss rod and traditional "skunk stripe" down the back
  • Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
  • Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)


Buy stratocaster neck rosewood from Amazon.com


Fender American Original 60's Stratocaster - Replacement Electric Guitar Neck - Rosewood Fingerboard

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Crafted at our Corona, Calif. Manufacturing facility, this genuine vintage-style Fender Stratocaster guitar neck features a thick "C-shaped profile and 9.5Radius round-lam rosewood fingerboard with 21 vintage-tall frets. The bone nut is pre-slotted with "pilot" String location grooves to make spacing a breeze when performing the final string slot filing and a lacquer finish offers a vintage feel. This replacement neck is the perfect way to give your Strat; an authentically '60S feel.

Buy stratocaster neck rosewood from Amazon.com
  • 9.5" Radius
  • 21 vintage tall Frets
  • Bone nut
  • Rosewood Fingerboard


Buy stratocaster neck rosewood from Amazon.com


Fender American Stratocaster Neck

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Crafted at our Ensenada, Mexico manufacturing facility, this genuine vintage-style Fender Stratocaster neck features a comfortable "C"-shaped profile and 12"-radius pau Ferro fingerboard with 21 medium jumbo frets. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots, and a gloss urethane finish offers an incredibly smooth feel. This replacement neck is the perfect way to give your Strat an authentically '60s feel.

Buy stratocaster neck rosewood from Amazon.com
  • 12"-radius pau Ferro fingerboard
  • "C"-shaped neck profile
  • 21 Medium jumbo Frets; White Dot Inlays
  • Pre-slotted synthetic bone nut
  • Gloss urethane finish
Buy stratocaster neck rosewood from Amazon.com


Healifty 22 Fret Right Hand Guitar Neck Maple Neck Replacement Rosewood Fingerboard for ST Electric Guitar Accessory (Orange)

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Description
This guitar neck is designed for ST electric guitar neck replacement. Guitar neck adopts natural maple, and fingerboard selects premium rosewood with 22 frets, smooth and with high density. Gloss Paint color and the natural fragrance of the wood itself embodies ancient and classic style. The wood is heavy and highly wear-resistant, exquisite appearance and precise design makes it ideal instrument gift and guitar parts replacement for guitar lovers and players.

Feature
- Size: About 66 x 5.78 x 2.67cm.
- Neck: Maple
- Fingerboard: Rosewood.
- Finish: Yellow Gloss Paint.
- Frets: 22 Frets.
- Tuning Holes: 10mm.
- Nut Width:42mm.
- Heel Width: 57mm.
- Heel Depth: 20mm/26mm(with fingerboard).

Package Including
1 x Guitar Parts

Buy stratocaster neck rosewood from Amazon.com
  • Elegant appearance and precise design makes it ideal instrument gift and guitar parts replacement for guitar lovers and players.
  • Upscale maple neck and rosewood fingerboard with 22 frets, smooth and dense.
  • Natural wood color and the natural fragrance of the wood itself embodies ancient and classic style.
  • The wood is heavy and highly wear-resistant, which ensures long lifespan.
  • Intended for ST electric guitar replacement.





Buy stratocaster neck rosewood from Amazon.com


Fender Licensed Guitar Neck For Stratocaster, Modern Style, Rosewood Fretboard

Buy stratocaster neck rosewood
Check Price on Amazon
Buy stratocaster neck rosewood from Amazon.com

Description:

Fender Licensed Modern Style Replacement Guitar Neck for Stratocaster

Maple with white dot inlays on Rosewood fretboard. Heel width: 2-3/16" (standard American Fender.) Scale Length: 25.5". Modern "C" shape profile. Nut Width: 1-11/16" (Nut not included.)

* 22 Medium Jumbo Frets
* Double-action Truss Rod headstock adjustment
* Rosewood Fretboard. 12" Radius
* Nut Width: 1-11/16"
* Pegholes are drilled for modern 10mm (25/64") tuning machines
* Thin, Clear Satin Finish
* Nut not included

Buy stratocaster neck rosewood from Amazon.com


Stratocaster neck rosewood

0 Comments about „Stratocaster neck rosewood

Leave a message

Your email address will not be published. Required fields are highlighted *