VideoSecu ML531BE TV Wall Mount for Most 27"-55" LED LCD Plasma Flat Screen Monitor up to 88 lb VESA 400x400 with Full Motion Swivel Articulating 20 in Extension Arm, HDMI Cable & Bubble Level WP5
The VideoSecu articulating mount is a mounting solution for 25"- 42", some models up to 55 inch (Please check VESA and Weight). The TV mount fit VESA 200x200mm/200x100/100x100 (8"x8"/8"x4"/4"x4"). This wall mount comes with 4 removable mount adapters. It can extend the VESA to 400x400 400x300 400x200 300x300 300x200 (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"). Please check your TV VESA; these are square or rectangular patterns between 4 and 16 inches per side on the rear of your display. Heavy gauge steel construction provides safety loading up to 88lbs display. The high-tech look mount offers 15 degrees forward and 5 degrees backward tilt, 180 degrees of swivel and extension up to 20 inch for viewing angle and TV placement adjustment. The removable VESA plate can be taken off for easy installation.
Will the mount fit my TV?
Firstly, please check the weight of your display, it should be less than 88 lbs. Secondly, If your Monitor or TV has 4 mounting holes on the back of the screen that are 400x400 400x300 400x200 300x300 300x200 200x200mm/200x100/100x100 (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4") apart from each other vertically and horizontally this bracket will fit. In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.
Notice: This mount fits most 25-49" TVs (VESA 400x400/400x300/400x200/300x300/300x200/200x200/200x100/100x100mm(16x16"/16x12"/16x8"/12x12"/12x8"/8x8"/8x4"/4x4")), some up to 50 55 inch TVs manufactured in recent 3 years
- Heavy guage steel supports screens up to 88 lbs. compatible with VESA (mounting hole pattern) 400x400mm/400x300mm/400x200mm/300x300mm/300x200mm/200x200mm/200x100mm/100x100mm (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4")
- Post-installation level adjustment allows the TV to perfectly level
- Tilt15/-5, swivel 180 degrees and rotate for maximum viewing flexibility; VESA plate can be taken off for easy installation by one person
- Low Profile mount retracts to 2.2" to save space, Extends 20" from the wall
- Standard mounting hardware,10 ft HDMI Cable and 6" 3-Axis Magnetic Bubble Level included
Corner TV Wall Mount Bracket Tilts, Swivels, Extends - Full Motion Articulating TV Mount for 37-70 Inch LED, LCD, Plasma Flat Screen TVs - Holds up to 99 Lbs, VESA 600x400 - Heavy Duty TV Bracket
- UNIVERSAL TV COMPATIBILITY - Our corner TV bracket fits most 37-70"TVs weighing up to 99lbs/45kgs. Suitable for VESA sizes (mounting hole pattern) - 200x200/300200/300300/400200/400300/400400/600400mm
- HIDDEN CABLE MANAGEMENT SYSTEM - This TV wall mount comes equipped with plastic threading slot that allows you to route your TV cables through the arm so you don't have to worry about ugly, tangly wires being on display and in the way
- FULLY ADJUSTABLE SWIVEL & TILT FEATURES - This corner TV wall bracket comes with a 5/-8 tilt, 180 swivel (max. swivel angle depends on TV size) and /-5 level adjustment. Hang your TV in the corner and you can still enjoy maximum viewing flexibility. Choose the perfect angle to watch TV from anywhere in the room
- MAKE FULL USE OF YOUR CORNER SPACE - Combining the strengths of the full motion articulating arms and the single stud bracket, our corner TV mount is sturdier and easier to adjust to your desired angle when mounting in an angled corner and allows you to make better use of the space in your home
- ROBUST & STYLISH DESIGN - PERLESMITH has been producing high quality TV wall mounts for many years now and we have a professional team of experts in this area. Our TV mounts not only meet your needs, but also give you an attractive and stylish appearance and come with a small clip on cover that hides the nails and holes that are made from mounting to your wall
Mount-It! MI-484C Articulating Corner Mount for TV Premium Swivel Full Motion Wall Bracket for 37-63 inch Screen LCD OLED Plasma 4K Flat Panel Screens VESA up to 800x400, 132 lb Capacity, Black
Mount-It! experience and guarantee. Mount-It! is the expert in television and computer monitor mounts. We apply our decade long experience in this field to offer the best features at value prices. Contact our friendly customer support team for any questions or issues.
Fits most of 37-63" TVs
Large extension capability is ideal for entertainment center installation.
Tilt, Swivel and Extend/Collapse function
Easy tilting angle adjustment
Heavy duty steel construction and high-tech welding technology
Built-in bubble level makes leveling work easy and convenient
Includes all necessary mounting hardware
- TV Size Range: 37 - 63 (some even up to 75" depending on VESA bolting pattern and the TV weight)
- Max TV weight: 132 lbs
- Mounting Pattern: Universal and up to VESA 800x400 and 132 lbs (Fits VESA 800x400, 700x400, 600x400, 600x300, 600x200, 400X400, 400X300, 400X200, 300X300, 300X200, 200X200, 200X100, 200X150, 100X100 mm)
- TV Mounting Holes: up to 32.5 in apart horizontally and up to 15.75 in vertically
- Wall plate dimensions: Each plate is 8.9 wide by 8 high.
- Unique articulating wall mount designed specifically for corner installation. Mount arms can independently articulate to allow centered or off-centered corner installation. By separating the wall plates, they can be installed on separate adjacent walls. If the wall plates are attached to the same wall, the mount can be installed just like any other articulating TV wall mount.
- Universal TV wall mounting bracket design fits most of 37-63 inch LCD/LED/Plasma TVs on the market (even up to some 70 inch TVs) up to VESA 800x400 and 132 lbs (Fits VESA 800x400, 700x400, 600x400, 600x300, 600x200, 400X400, 400X300, 400X200, 300X300, 300X200, 200X200, 200X100, 200X150, 100X100 mm). Please check VESA (mounting hole pattern behind TV), stud spacing, possible blocked cable/input and TV weight prior to making purchase decision to determine whether this TV wall mount fits your TV and the installation application.
- This wall mounting kit is compatible with Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse 37, 40, 42, 48, 49, 50, 51, 52, 55, 60, 63 and some 65 and 70 inch TVs. Tilt, Swivel, Articulate, Extend, Collapse with this universal TV wall mounting bracket.
- Continuous Tilt Feature (up to 15 degrees up or down) for Better Viewing Angle and Reduced Glare. Low-profile design ensures TV is close to the wall for a sleek finish. Large open wall plate design assures easy access to back of the TV and cables.
- Weight rated to 132 lbs - This bracket is one of the strongest brackets available on Amazon. Install your precious TV with confidence. Dual arm design prevents sagging that might be visible on lower weight rated and single arm mounts. Constructed from Reinforced Steel. Quick and easy to install - bracket comes complete with full instructions, integrated bubble level, installation hardware.
Mount-It! Full Motion TV Wall Mount Corner Bracket, VESA 400 x 400 Compatible, Extending Arm Articulating, Swivel, Tilt Fits 32, 37, 40, 42, 47, 50 Inch TVs, 66 Lbs Capacity Black
Mount-It! Articulating Full Motion TV Wall Mount Bracket Mount-It! MI-4471 is a durable, low-profile, full-motion articulating TV wall mount that offers extreme versatility with the maximum extension of 15 inches from the wall. It is suitable for Smart TVs such as LCD, Plasma or LED displays that range from 20 to 50 inches, some up to 55 Inches. MI-4471 single arm design is constructed with a high-strength steel for its durability to ensure our arms will not sag and they will provide you the ability swivel 180 degrees and tilt up 12 degrees with ease. This mount offers a sleek, high-tech look, adjustable mounting brackets, a free cable and of the necessary hardware with instructions making this mount user friendly. Features: Fits most of 20-50" TVs Collapses to 3.25" low profile, Extends 15" from the wall. Tilt, Swivel and Extend/Collapse function Easy tilting angle adjustment Heavy duty steel construction and high-tech welding technology Includes all necessary mounting hardware Specifications: * TV Size Range: 20" - 50" (some even up to 55" depending on VESA bolting pattern and the TV weight) * Max TV weight: 66 lbs * Mounting Pattern: Universal and up to VESA 600 x 400. Fits VESA 400X400, 400X300, 400X200, 300X300, 300X200, 200X200, 200X100, 200X150, 100X100, 75X75mm * Tilt: up to 12 degrees down or 2 degrees up and any angle in between. Swivel: 90 degrees to left or to right * Extension from the wall: between 3.25" to 15"
- Universal TV wall mounting bracket design fits most of 20-50" LCD/LED/Plasma TVs on the market (even up to some 55 inch TVs) up to VESA 400x400 and 115lbs (Fits 400X400, 400X300, 400X200, 300X300, 300X200, 200X200, 200X100, 200X150, 100X100, 75X75mm). Please check the VESA (mounting hole pattern behind TV), stud spacing, possible blocked cable/input and your TV weight prior to making purchase decision to determine whether this TV wall mount fits your TV and the installation application.
- This wall mounting kit is compatible with Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse 20,22, 24, 26, 30, 32, 40, 42, 48, 49, 50, 51, 52, 55 inch TVs.
- Tilt, Swivel, Articulate, Extend, Collapse with this universal TV wall mounting bracket. Full motion capability makes it ideal for corner installation, over a fireplace, inside a TV center. This slim mount is designed to be installed on a single wall stud. TV stays as close as 3.25" from the wall or can extend up to 15 inches. Swivels left or right 90 degrees.
- Continuous Tilt Feature (up to 12 degrees down or 2 degrees up) for Better Viewing Angle and Reduced Glare. Low-profile design ensures TV is close to the wall for a sleek finish. Cable management feature will neatly organize cables for a professional installation.
- Weight rated to 66 lbs - This bracket is one of the strongest brackets available on Amazon. Install your precious TV with confidence. Constructed from Reinforced Steel. Quick and easy to install - bracket comes complete with full instructions, and FREE INSTALLATION HARDWARE
Mounting Dream TV Mount Full Motion with Perfect Center Design for 26-55 Inch LED, LCD, OLED Flat Screen TV, TV Wall Mount Bracket with Articulating Arm up to VESA 400x400mm, 60 lbs MD2377
Fits 26-55" Tus this mount fits most of 26-55" Tus sold today. It fits TVs with mounting holes as close as 3"x3" Or as wide as 16"x16" (In TV terms - VESA 75x75mm to 400x400mm). specifically, it fits VESA 75x75mm, 100x100mm, 200x100mm, 200x150mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm. Retracts 3. 2" Low profile, extends 19" From the wall with articulating arm, This mount retracts to 3"(to wall) to save space, and extends up to 19. 3" From the wall. Tilt, swivel and rotate function 5/-15 tilt, /-swivel and /-3 rotation for maximum viewing flexibility, provide smooth adjustment for all directions, making it easy to view your TV from multi-angles. Heavy duty steel construction, 60 lbs. Loading capacity Constructed with heavy duty steel materials with durable powder coated finish. This mount is 100 welded by automatic robot. This advanced welding technology makes the mount sturdy, and ensures mounted TV stable and secure, supporting TV weight up to 60 lbs. Includes all necessary mounting hardware This mount ships with hardware for both wall and TV mounting. Concrete Anchors are not included, which will be sent if needed. All our mounts are only for concrete wall installation not for dry wall alone application! .
- Check Centered StudTV wall bracket fits for most of 26-55" TVs up to 60 LBS, with max VESA of 400 x 400mm/mounting holes spacing. Images on left side will help you see if this TV bracket perfectly fits your TV in the aspects: VESA, studs position and possible blocked input.
- FlexibleFull motion TV wall mount makes viewing more comfortable: tilts TV up 5 and down 15 to reduce glare, swivels TV left or right according to your seats position. Pull out to 19.3" and retract back to 3", making your TV alive to move.
- Easy installation TV mount with decent instruction and all included hardware in pre-labeled bags. /-3 post-installation adjustment allows perfect TV leveling. Comes with cable ties and bubble level as gifts. Concrete anchors will be sent per request. All our TV bracket are NOT for dry wall alone installation!
- Safety & StabilityTechnology of robot welding makes whole TV mounting bracket unit sturdy and safe.
- 100 Purchase GuaranteePatent No.: 29/588,044. US based customer support answers your pre-purchase and installation questions. Our mount is 10-year warranted!
Vemount Corner TV Wall Mount Bracket Full Motion for 30-65 inch Samsung LG Vizio Sony Sharp LCD LED OLED Plasma Flat Screen Panel Smart TV with Swivel Articulating Arms up to VESA 600x400mm and 99lbs
TV SIZES: Fits most 30"-65" TVs, including:30" 32" 34" 37" 39" 40" 42" 43" 46" 47" 48" 49" 50" 52" 55" 58" 60" 62" 63" 65" 70".
VESA SIZES(mounting hole pattern behind TV): Fits VESA from 100x100mm(4"x4") to 600x400mm (24"x16"), including:100x100, 200x200, 300x300, 400x400, 200x100, 400x200, 400x400, 600x400.
MAX LOAD CAPACITY: 99lbs/45kg
CORNER MOUNT: by separating the wall plates, this corner mount can be installed on separate adjacent walls. Mount arms can independently articulate to allow centered or off-centered corner installation. Please note it could only support 30-53 inch TVs.
FLAT WALL MOUNT: If the wall plates are attached to the same wall, the mount can be installed like other articulating TV wall mounts. it could support 30-65 inch TVs.
TILT: /- 15 degrees and any angle in between
SWIVEL: 180 degrees horizontal rotation with secure dual arms
extension: Max 18 inch from the wall
simple 3-STEP INSTALLATION:
a. Screw the brackets to the TV
b. Bolt the wall plate to the wall
c. Attach your TV to the wall plate
1.Please check the back of your TV, find the mounting hole and measure horizontal and vertical distance. If the horizontal distance(width) is within 24"(600mm) and vertical distance(height) is within 16"(400mm), then the bracket will work for you.
2.Make sure the wall mounted is solid, such as concrete wall or solid wooden wall. Do not install in hollow or floppy wall.
3.Please note that this TV mount can't fit curved monitors.
4.Standard hardware set doesn't include all sizes of screws, please check the TV screws sizes before purchase (see image "PARTS"), if the screws do not fit your TV, you might need to buy from local store.
- COMPATIBILITY: fits 30"-65" TVs with VESA(mounting hole pattern behind TV) from 100x100 mm (4"x4") to 600x400mm (24"x16")weight less than 99 LBS.
- SPACE SAVING: dual wall plates design especially for corner mount, making full use of corner space.
- BETTER VIEWING: articulating by tilt adjustment from -15 to 15 and Swivel 180, providing better viewing from any direction.
- SIMPLE 3-STEP INSTALLATION: you can do it yourself, no extra expert installation cost.
- WARRENTY: fulfilled by amazon, you can return the mount with no reason, plus we offer ONE year warranty!
InstallerParts 37"-65" TV Corner Mount Swivel/Tilt 20" Dual Extension Arm Heavy Duty LCD LED TV Monitor Flat Panel Screen, HDMI Cable
InstallerParts Flat TV Wall Mount is designed to fit televisions of all brands, including Samsung, LG, Sony, Vizio, Toshiba, Insignia, Sharp, and any other HDTV sets between 37" to 65".
Where Can You Use Our TV Mount?
This mount is perfect for installation in your living room, family room, garage, or fitness area or in commercial settings such as a bar, restaurant, fitness center, waiting area, dentist office, doctors office and any other area where two walls come together.
Heavy duty swivel and tilt LCD/LED flat screen TV mounting bracket. Tilts up to 15 up and down and swivels 60, which results in a wide range of motion for maximum flexibility.
The distance from the wall to the TV mount is shortest at 5" (125mm) and extends to 20" (515mm), permitting you to adjust the TV to your desired height.
Will My TV Fit?
This TV wall mount fits most 37"-65"; LCD/LED flat panels up to 132lbs (60kg).
Supported screen size is shown as a guidance. Please check bracket dimensions and make sure overall bracket size does not exceed TV.
Our plasma TV mount meets VESA Mounting Interface Standards (MIS). VESA is an international nonprofit that supports and sets industry standards for the PC workstation and consumer electronic industries.
The LED TV Mount comes with full mounting hardware included and a slide-in VESA plate can be taken off for a quick and easy install.
TV size: 37"-65"
Wall to TV: 5" to 20" (125mm to 515mm)
Tilt angle: 15 up and down
Weight capacity: 132lbs (60kg)
VESA Compatibility: 200x200mm to 800x400mm
- HEAVY DUTY UNIVERSAL CORNER MOUNT: Fits most 37 to 65 inch Flat Panel Displays up to 130lbs
- VESA COMPLIANT: Our TV mount meets VESA Mounting Interface Standards (MIS) and is compatible with mounting hole patterns from 200x200 to 800x400.
- EASY INSTALLMENT: Standard hardware required to fasten your LCD LED or Plasma TV to your corner mount, comprehensive product installation manual and HDMI cable included.
- SWIVEL & TILT: Swivels 60 in either direction and tilts 15 upwards and downwards.
- DESIGN: Made with solid toughened steel construction and a durable scratch resistant finish.
ECHOGEAR Full Motion Articulating TV Wall Mount Bracket for 26-55 Inch TVs Extend, Tilt and Swivel Your Flat Screen TV 180 Degrees Easy Single Stud Installation EGMF1-BK
For full motion capabilities on a single stud, this Echogear mount is a great choice. Mounting medium-sized screens (26"-55") on a single stud opens up a world of possibilities, choose your own adventure.
For A Corner Mounted TV
If you are mounting your TV in a corner, this is the perfect solution. Every corner-mounted TV isn't equal. Sometimes your furniture is off to the side because you need space to reenact pro wrestling moves (STONE COLD STUNNER). That means your mount needs the extension and swivel to handle it. This mount checks both boxes. It can support larger TVs and still have the maneuverability to move the screen wherever you need it.
Or Literally Anywhere Else
With up to 20" of extension and 180 of swivel, & 15 of tilt this versatile mount is for more than just corner mounted TVs. Anywhere you want a TV up to 55" to go, this bracket can handle it. The single-stud install means you don't need to worry about stud spacing or complicated installs. This is definitely one DIY project someone can tackle on their own. We provide the easy to read instructions and mount, you bring the beer, and we'll have a hot TV mounting date. Your screen will be on the wall in under 30 minutes. Oh, and we threw in an HDMI cable to make your life easier.
If you have a TV larger than 55" that you still need to mount, check out the Echogear compare chart below. We've got em' all. When you buy with Echogear, you don't just get an awesome product at a great value, but a ton of extras that cheap knock-off mount sellers can't touch. Installing our mount is as easy as it gets & unlocks almost limitless TV angle adjustments for the perfect view every time. Our install manual is awesome and even has some jokes. Who knew mounting a TV could actually be fun? If you run into a snag we've got US-based pros standing by to answer your calls 7 days a week. At Echogear, we've got your back.
- DIY in no time. Our easy to follow instructions and simple 3-step install process make mounting your TV a breeze. Installs in a single wood stud for maximum flexibility.
- Smoothly articulates for an awesome view from any seat in the room. Extend & swivel to position your TV perfectly for the season finale. An ideal option for mounting your TV in a corner.
- Window glare bugging you? 15 tilt capability makes adjustments easy. No tools, no fuss, no hands. Just kidding, you'll need your hands.
- Our durable steel mounts are designed to accommodate almost any VESA pattern & TVs up to 55". They come with an extensive hardware packet to ensure compatibility with your TCL, Samsung, or any other TV.
- We're here for you. ECHOGEAR TV mount experts are available 7 days a week to help you finish your project. We guarantee satisfaction with ECHOGEAR, or your money back.
Aeon Stands and Mounts Full Motion Wall Mount with 29-Inch Extension for 32 to 65-Inch TV
LONG EXTENDING SWIVEL ARM
This AEON TV mount can extend out 29 inches away from the wall while retracting to a slim 2.80" from the wall. Great for when you need to reach far from the wall for more advanced viewing angles. With a 29" extension you can extend and turn a 55 inch TV 90 degrees sideways without hitting the wall. Great for when you want to view in another room etc...
POST INSTALLATION LEVELING
You just hung up your beautiful new TV on the wall, you made sure to level first , but damn it anyway its crooked a little. With other TV Mounts you will have to take the bracket off the wall, drill new holes and re install. With this AEON TV mount you have no worries. Simply adjust the tv via the self leveling screws to micro adjust your tv so it is PERFECTLY level.
BUILT TO LAST
This AEON mount features a lifetime warranty because all AEON mounts are manufactured with longevity in mind.
This AEON TV Mount is built from SOLID die cast steel to insure the strongest possible mount. AEON safety tests each and every mount to four times it's rated weight. That means AEON tested this mount to hold 280 pounds (for 5 min) without failure. This way we can positively say it will hold up to 70 pounds easily. Safety first and foremost.
- Extends from 2.80" to 29" away from wall
- Integrated cable management
- 5 degree and -10 degree tilt
- Post installation leveling feature.
- Mounts to single stud wall or masonry wall.
- Maximum TV weight: 70 lbs
- Includes all hardware for installation to wood stud or concrete wall.
- This AEON long arm TV mount will fit most TV's from 32 to 65 inch in size. To insure your TV will fit please make sure it has one of the following VESA Patterns : VESA 100mmx100mm,VESA 200x100mm,VESA 200x200mm,VESA 300x200mm,VESA 300x300mm,VESA 400x300mm,VESA 400x400mm. This tv wall mount fits many popular name brands like Samsung, Panasonic, Sony, Vizio, Sharp, LG,BENQ, and many more.
- Diagonal measurement : 23''-55''. Unlike other TV mounts which feature low grade hollow, tubular steel arms, this AEON Mount features solid die cast arms with no welded joints to fail. This integral design offers superior strength and safety. This mount can support up to 70 pounds and has passed a safety test of 280 pounds.
- Integrated cable management system allows you to neatly conceal TV wires within the inside of the arm so they remain clutter free. Includes all mounting hardware to mount to a masonry or wood stud. Lifetime Warranty.
- Easy quick installation to either a masonry/concrete wall or single wood stud. The post installation leveling feature insures you have a perfectly leveled TV, even if the TV mount is not installed perfectly level on the wall. Single stud minimal foot print behind the TV keeps the mounting bracket hidden and out of sight.
- Full motion swiveling arm extends 29 inches away from the wall while retracting to a slim 2.80" . A 55 inch TV can swivel 90 degrees sideways in either direction without hitting the wall. Great for when you want to view TV in another room. Easily Pans 180 degrees side to side. Tilts down 10 degrees and up 5 degrees for optimal viewing.
Corner TV Wall Mount - Full Motion Swivel Wall Mount Bracket Designed for Corner Installations, VESA 400x400 Pattern Fits 32, 37, 40, 42, 50, 55 Inch Televisions, 66 Lbs Capacity, MI-4481
Open up space in your living room with this articulating corner mount unit. Designed specifically for corner installation with the ability to tilt and swivel, so you can enjoy a perfect view from any seat. The tilt feature allows for a more comfortable watching experience and eliminates that annoying glare. Features a dual arm design to reduce sag and boasts a load capacity of up to 66 lbs., making it a mount you can trust in.
- TV CORNER WALL MOUNT FULL MOTION: Designed with split backplates and dual articulating arms to allow installation to a caddy corner. Utilize the dead corner space by installing your flat screen television on two adjacent walls. If the wall plates are attached to the same wall, the mount works just like any other articulating TV wall mount with swivel and extension capabilities.
- FULLY ADJUSTABLE VIEWING ANGLES: TV swivel and tilt angle of this flatscreen corner wall mount can be adjusted to fit your room and ensure the best viewing angle. Swivels left and right 45 degrees and tilts up and down 15 degrees. With an extension range of 4.33" min to 16.14" max, even 55 inch TVs can be installed at a corner with room to adjust angles. Post installation angle adjustment of 5 degrees allows perfect leveling of your TV even after the mount is on the wall.
- VESA COMPATIBLE UNIVERSAL DESIGN: TV wall mount corner bracket comes with industry-standard VESA patterns of 100x100, 200x100, 200x200, 300x300, 400x200 and 400x400 mm, making it compatible with all the TV brands on the market with one of these bolting patterns, up to 66 lbs of weight.
- HEAVY-DUTY DESIGN: High-strength steel with 66 lbs of rated capacity safely hangs your TV on the wall. Carrying capacity is tested multiple times the rated load to ensure security of your TV. Dual arm design makes the corner wall bracket sturdier than single arm mounts and prevents sagging.
- EASY INSTALLATION: With the detailed step-by-step instructions and provided hardware, you can install this corner television mount in minutes, without having to pay a professional.
- Los angeles lakers can coolers
- Wormwood capsules now
- Libra scales of justice
- Hampton fitness rubber weight
- Heater valve 1 2
- Pocket rockers toys